Vehicle Accessories

Door Handle Plates $630.00 set of four.
Hood Handles $199.00 set of two (with screws)
Complete Set $999.00
CNC Billet Hood Grill This CNC machined piece starts out as a 200 lb block of solid aluminum! We have modified the grill giving your H2 a total "concept vehicle" look. This is one piece that will surely draw plenty of attention around the show circuit and separate your H2 from the crowd. Patent Pending Call for Pricing Installation Time: xx minutes
CNC Billet Hood Handles These CNC machined handles replace the stock plastic pieces with "massive" 2.5 lbs works of art that are sure to enhance the vehicles look. Available in dimpled or ported. (set of 2) $249.00 Installation Time: 15 minutes
CNC Billet Hood Latches These custom CNC machined parts replace the factory pieces with "big" billet components that add to the bold look of your vehicle. (set of 2 includes 4 pieces) $229.00 Installation Time: 15 minutes
CNC Billet Vents These custom CNC machined vents replace the factory plastic pieces with brilliant chrome components that greatly enhance the vehicle's look. Our side air vents are precision machined to exacting tolerances and follow the contour of the body giving you the "best fit in the industry period". No other manufacturer's part fits the body without leaving "unsightly" gaps. (set of 2) $329.00 Installation Time: 10 minutes
CNC Billet Door Bezels These CNC machined door bezels replace the stock plastic pieces on all four doors with stunning chrome components. These custom bezels look best when combined with our CNC billet door handles. As an added benefit that also provide an additional measure of security against theft. These custom door bezels look best when combined with our door handle pulls (set of 4) $599.00
CNC Billet Door Handle Pulls These CNC machined door handle pulls replace the plastic pull handles with strong billet components that are a "must have" to complete the custom look of your H2. We have beefed up the handle and added dimples, these handles are truly stunning! They not only look great but provide an additional level of structural integrity that plastic just can't duplicate. These custom door pulls look best when combined with our billet bezel package. Patent pending $299.00
CNC Rear Door Handle This giant sized CNC machined billet handle replaces the stock plastic piece and completes the look of the rear door. We have duplicated the look of our billet door handles allowing you to carry the theme around the vehicle. One look and you'll agree that this handle is a "must have". $189.00 Installation Time: xx minutes
CNC Billet Rear Louver These CNC machined components start out as "two" 54 lb blocks of solid aluminum. That's right it takes 108 lbs of solid aluminum in order to produce just two louvers. Words can not describe how much these brilliantly chromed pieces add to the styling of the vehicle. Without a doubt these parts are a show stopper and bring perfect balance to the rear of the vehicle.. Call for Pricing Installation Time: xx minutes
CNC Billet Gas Cap Replace your plastic cap with a "huge" CNC machined billet cap weighing in at one pound! These caps utilize all OEM internal parts and comply with Federal emissions standards. They come fully assembled and are "locking" units for additional protection. Looks best when combined with our custom fuel trim ring $159.00
CNC Billet Fuel Trim Ring This CNC machined billet trim piece mounts snugly around the fuel filler "cone". When combined with our locking billet gas cap this piece totally completes the look fuel filler area by adding just the right amount of chrome. No drilling required. $99.00 Installation Time: 10 minutes
CNC Billet Fuel Door This CNC machined fuel door covers the entire area around the gas cap. Not only does it look great, but it also has a locking door for additional security. This unit is a solid piece that fits snugly to the body and can not be simply "pulled off" like lesser quality models. No drilling required. $259.00 Installation Time: 10 minutes
CNC Billet Roof Rack Knobs These CNC machined knobs replace the plastic knobs on the roof rack with strong billet components. (set of 4) Looks best when combined with our roof rack ends. $159.00 Installation Time: 15 minutes
CNC Billet Roof Rack Ends These CNC machined roof rack end caps are beveled to match the aggressive profile of the H2. They utilize your OEM locks and original keys for convince. These caps look especially good when combined with our roof rack knob package. $199.00 Installation Time: 10 minutes
CNC Marker Lamp Bezels These CNC machined pieces fit around the four marker lamps on the sides of the vehicle. We have increased the size of the part so that it would completely encapsulate the marker lamp. These pieces really stand out and match the aggressive profile of the vehicle and add style to an otherwise plain area. (set of 4) $239 Installation Time: 20 minutes
CNC Running Light Bezel These CNC machined rings completely surround the daytime running lights with brilliant chrome. They bring a custom styling touch to the front of the vehicle that is visible from multiple angles. One look and you'll agree these parts are hot. $149.00
CNC License Bracket This fully CNC machined piece adds that little something needed to your license plate area. Once installed you will realize just how empty that space was before it got this infusion of chrome. We have once again matched the heavy bevel of the vehicle in the design of this product. $145.00 Installation Time: 5 minutes
CNC Billet Step Plate These CNC machined components replace the plastic factory steps with "massive" billet pieces. These are without a doubt eye popping pieces that Compliment the strong lines of the H2. We have created a diamond tread design on the steps for additional grip when entering and exiting the vehicle. (No drilling required). Call for Pricing Installation Time: 15 minutes
CNC Billet Rear 'D' Rings These CNC machined D-rings and bases replace the cast factory pieces with high tech billet components. They bring a total custom look to the rear of the vehicle as we have redesigned the stock parts. The new pieces feature flush mount bolts with stainless hardware. (NOT RATED FOR TOWING) Call for Pricing Installation Time: xx minutes
CNC Billet Front 'D' Rings These CNC machined components are a replacement for the black cast parts that come with the vehicle. We have matched the look of our rear D-rings and enlarged the ring to better "fill in" the front bumper. The hooks add just the right amount of style and dimension to the front end. They install using the original factory bolts and "no" drilling is required. (NOT RATED FOR TOWING) $239.00 (pair) Installation Time: xx minutes
CNC Billet Taillight Guards These CNC machined parts carry a bold new look to your H2. Machined for a precise fit these pieces add a dimension to the rear of the vehicle continuing the "heavy beveled" look. They install with stainless hardware and require "no" drilling. Call for Pricing Installation Time: xx minutes
CNC Billet Mini Grill This CNC machined grill plate mounts directly over the factory grill piece for a custom look. All hardware is hidden and only takes 5 minutes to install. This piece continues the style of the main grill and completes the look of the front end. This grill is held securely in place with stainless hardware (not double sided tape) however "no drilling is required". $149 Installation Time: xx minutes

HUMMER H2 Billet Exterior Packages
Custom H2 Kit #1 This 10 piece CNC machined package opens the door to customizing your H2. The set includes 2 hood handles, 2 side air vents, 2 hood latch handles & anchors (4 pieces), 1 fuel cap and 1 fuel trim ring. $999 Installation Time: 45 minutes
Custom H2 Kit #2 This 14 piece CNC machined package turns it up a notch with a bigger dose of chrome. The set includes 2 hood handles, 2 side air vents, 2 hood latch handles & anchors (4 pieces), 4 door bezels , 1 fuel cap and 1 fuel trim ring. $1499 Installation Time: xx minutes
Custom H2 Kit #3 This 33 piece CNC machined package turns up the heat even higher. The set includes 2 hood handles, 2 side air vents, 2 hood latch handles & anchors (4 pieces),4 door bezels, 4 marker bezels, 4 roof end caps, 4 roof rack knobs, 6 interior trim rings, 1 fuel cap, 1 fuel trim ring and 1 custom gear shift lever. Call for pricing. Installation Time: xx minutes
Custom H2 Kit #4 This 38 piece CNC machined package really packs a punch when it comes to custom components. The set includes 2 hood handles, 2 side air vents, 2 hood latch handles & anchors (4 pieces), 4 door bezels, 4 door handle pulls, 4 marker bezels, 4 roof end caps, 4 roof end knobs, 6 interior trim rings, 1 rear door pull, 1 fuel cap, 1 fuel trim ring and 1 custom gear shift lever. Call for pricing. Installation Time: xx minutes
Custom H2 Kit #5 This 41 piece CNC machined package is the "ultimate" in custom chrome.The set includes 2 hood handles, 2 side air vents, 2 hood latch handles & anchors (4 pieces), 2 rear louvers, 4 door bezels, 4 door handle pulls, 4 roof end caps,4 roof rack knobs, 6 interior trim rings,1 rear door handle pull, 1 fuel cap, 1 fuel trim ring, 1 license bracket and 1 custom gear shift lever. Call for pricing. Installation Time: xx minutes

CADILLAC ESCALADE, EXT
(made from billet aluminum chrome plated)
Note: stock door handle and hardware will be used to complete this installation.

Door Handle Plates $630.00 set of four.

XENON GROUND EFFECTS FOR HUMMER H2
Front, Back and Side Skirts $2999 (none painted)
Roof light bar holder with 4 roof light pods add $499 (light bulbs are extra) Hood light bar add $259 (light bulbs are extra)

Ads By Google

All information on this site is subject to change without notice

Super Buy Tires, Inc.
9040 E. Rosecrans Ave, Bellflower CA 90706 USA
Tel:(562) 630-5848
Fax:(562) 630-5741
Fax:(562) 630-7719